Tube Manufacturing Equipment Metal Duct Producing Mill Steel Pipe Production Line
ERW60 high frequency longitudinal welded pipe production line is designed to produce welded pipes of 20mm-50mm in OD and 0.8mm-3.0mm in wall thickness, as well as corresponding square and rectangular pipe.
Application:GI, carbon steel and stainless steel tubes for metallurgy, construction, transportation, machinery and vehicle industries.
|Steel Pipe Specification|
|Round Pipe diameter||Ø20–Ø60mm|
|Pipe Thickness||0.8 – 3.0mm|
|Square and rectangle pipe||15x15mm – 50X50mm|
|Pipe Thickness||0.8 – 2.0mm|
|Steel Tape Specification|
|Material||Carbon steel (δb≤500Mpa, δs≤235Mpa)|
|Strip steel width||65mm-190mm|
|Strip steel thickness||0.8mm-3.0mm|
|The maximum weight||1.0-2.0 tons|
|Electric installed capacity||appro.65KW|
1. Double heads Decoiler (Hydraulic model)
It is used to support the coil and provide raw materials for the production line. The reel is cantilever type.
2. Shearing & Welder
To connect the strips after cutting the preceding coil tail end and the succeeding coil top end and being welded together by CO2 gas shielding welding to keep the Pipe Welding Line running continuously.
Storage of steel coil, Advantage: The feeding is more stable, without bending, while reducing the resistance of the feeding, it will not cause damage to the galvanized layer surface, and the noise is relatively lower.
4.Forming and Sizing Machine
The steel strip of a certain width is bent into corresponding specifications of round pipe, rectangular pipe or open profile through roll forming.This unit consists of five parts: forming machine, welding machine, cooling part, sizing machine, and straightening machine.
5.High Frequency Welding Equipment
Tube Mill High Frequency Welder is specially designed for straight seam welding.The high power capacitor C and inductor coil L compose current-mode parallel upper-voltage resonance circuit, which doesn’t need output transformer.
Cool down quickly, Fixed welded pipe shape
7. Cold Flying Saw
Cut pipe, Low inertia DC motor through mechanical transmission device, measuring, calculate and driving saw car at the same speed with the high-speed running pipe, then cut off the pipe with specified length.
8. Run out table(Stacking Packing Machine)
It’s a packaging equipment designed especially for steel pipe industry, which can realize automatic stacking the tubes or pipes into hexagonal or square shapes, and then Automatic bundling, Sloping, Digital Weighter
Straightening of finished pipes with sizing, The upper, lower, left and right positions of the vertical roller of the straightening machine can be adjusted to ensure the outer diameter of the finished rigid tube
|Contact Person :||Jerry|