Erw Pipe Production Line Seamless Steel Pipe Production Tube Line
ERW89 Pipe Mill/Tube Mill
ERW89 high frequency longitudinal welded pipe production line / pipe making machine / tube mill is designed to
produce welded pipes of 42mm-89mm in OD and 1.5mm-4.5mm in wall thickness, as well as corresponding square and rectangular pipe.
Basic Technical Information of Welded Pipe Production Line
|Square & rectangle tube
||35mm×35mm -70mm×70mm Thickness:1.5mm-3.5mm
||6m-12m Length Tolerance: ±3mm
||Mill installed capacity
||72m(length) ×5.5m (width)
||Carbon Steel coil
||Q235B(ASTM GR·D,σs 230)
||130mm-280mm Thickness: 1.5mm-4.5mm
√ High production efficiency, line speed can be up to 110m/min.
√ High yielding, the machine works stably at a high speed.
√ Low wastage, low unit wastage and low production cost.
√ High accuracy, diameter error is only 0.5/100 of the pipe OD.
GI, carbon steel and stainless steel tubes for metallurgy, construction, transportation, machinery and vehicle industries.
Steel Coil → Double-arm Uncoiler → Shear and End Cutting & Welding → Coil Accumulator → Forming (Flattening
Unit + Main Driving Unit + Forming Unit + Guide Unit + High Frequency Induction Welding Unit + Squeeze Roller) →
Deburring → Water Cooling → Sizing & Straightening → Flying Saw Cutting → Pipe Conveyor → Packaging →
||Cold roll forming process
||Good roller design
|ZTF forming technology
||Reduce 60% roller cost, save roller changing time, increased production efficiency
|Square & rectangular pipe
||General round-to-square process
||Stable forming process
|Round to square with turkshead
||Good pipe quality, reach same wall thickness with round pipe
|Directly squared forming technology
1) Compare with round into square&rectangle forming way,this way is better for the shape at the edge of cross section,comparatively, semi-diameter of inner arc is Small,and the brim is flat,outlook is regular.
2) the whole line load is low ,especially the sizing parts.
3) The width of steel strip is small about 2.4-3% than round into square & rectangle,it can save the consume of raw material.
4) It adapt the multi-point bending way, avoid the axial force and side abrasion, reduce the forming step while ensure the quality,meanwhile it reduce the power wastage and roller abrasion.
5) It adapt the combined type roller on the most of the stands,it realize that one set of roller can produce dozens of square&rectangle pipe with different specification,it decrease the store of roller,low the cost about 80% on roller, Fast the bankroll turnover, short the time one new product design.
Zhongtai Group is established in 2000, locates in Shijiazhuang. We are an IS09001 certified pipe making machine and cold rolled section steel forming machine manufacturer, reputed enterprise in China's pipe making industry with the largest production capacity, the most advanced technology and strongest competitiveness,one of the executive directors of China Cold-formed Steel Structure Association and one of China's top ten pipe making machinery brands. There are three subsidiary companies respectively carry out technology development, production processing and mold manufacturing. Plant area 67000 m, with machining, heat treatment and assembly plants.
Q:Are you manufacturer?
A:Yes,we are manufacturer.We have our own technical team.Welcome to visit us.
Q:What kind o f payment term you can do?
A:We are flexible about payment terms,we can also help you on financing,please contact us for details.
Q:What info you need before you make the proposal?
A:The pipe diameter and thickness range which you need or the profile drawings, material information,your special
Q: What should I do if I just start a new business?
A:Contact us immediately ,we provide free consultant pre-sales service.Also we can help you to solve the material
(steel coil)purchase,worker train,international market price.
Q:How do you do QA?
A:We have special team do strict QA,this is our strengths:
(1)Every gear box will be tested for 8 hours with oil inside to guarantee there is no
(2)Every shaft will be inspected for the centering jumpiness.
(3)Every roller will be checked to make sure its in the range of tolerance critical parts
will be inspected for all dimensions.
Q:Why I should choose you,what are the differences between you and other
A:We are concentrate on this area for more than ten years.
Pre-sale:If the customer can not provide detailed technical information,our engineer
will go to the customer’s plant,draw precise drawings after measuring unit,to meet
your production requirement.
After-sale:Our strong team of engineers and experienced technicians can provide
you with installation instructions,operating instructions,quality control guidance