Multi-functional Pipe Mill/Tube Mill

Description

It can produce round pipe with ZTF forming technology ,Square and rectangular pipe with direct square forming technology,and also some simple open section steel.

1) ZTF Forming Technology Used In Producing Round Pipe

● Cut down roller changing time, breakdown section does not need to change rollers . And it can cut-down producing period.

● Saving about 60% cost on the rollers

● Release labor intensity.

● Roll forming technology, the caliber is different and propitious for high steel grade such as X70,N80 .

● The steel strip is bended more reasonably, to reduce the friction between the strip and roller, and also reduce the waste of the roller.

● It is easier to restore and adjust roller.

2) Directly Square Forming Technology In Producing Square&Rectangular Pipe

● The width of steel strip is small about 2.4-3% than round into square & rectangle,it can save the consume of raw material.

● Compare with round into square&rectangle forming way,this way is better for the shape at the edge of cross section,comparatively, semi-diameter of inner arc is Small,and the brim is flat,outlook is regular.

● The whole line load is low ,especially the sizing parts.

● It adapt the multi-point bending way, avoid the axial force and side abrasion, reduce the forming step while ensure the quality,meanwhile it reduce the power wastage and roller abrasion.

● It adapt the combined type roller on the most of the stands,it realize that one set of roller can produce dozens of square&rectangle pipe with different specification,it decrease the store of roller,low the cost about 80% on roller, Fast the bankroll turnover, short the time one new product design.

3) Produce Parts Of Abroach Cold Rolled Section Steel

Simple abroach cold rolled section steel such as directly formed channel steel, C shaped steel, Z shaped steel.

ERW Product List

Note: We can design and manufacture pipe making machine according to customers' requirements.